Home »
Month: August 2017
View Virtual Tour Technology Center 86,000 total square feet Fabrication Shop – 40,000 square feet Office space – 36,000 square feet 15 wireless access points 12 conference rooms 34 offices 82 cubes 4 hotel seating areas 4 phone booths 4 collaboration spaces 1 exercise room 25 TVs Outside Inventory – 10,000 square feet Departments IT […]
Read More
View Full Case Study Problem Facing the failure of its reverse osmosis systems, an Indiana gas-and-coal energy facility sought the company with the best emergency response and customer service in the industry — MPW Industrial Services. To meet the customer’s standards for this project, MPW would have to execute a quick, efficient setup to provide […]
Read More
View Full Case Study Problem After a major refurbishment, a Canadian nuclear plant required additional process and boiler feed water for plant start-up and commissioning. The plant’s raw water supply contained measurements ranging from 1 to 10 NTU, conductivity from 70 to 100 and color units ranging from 180 to 420. The plant also experienced […]
Read More
View Full Case Study Problem A North Dakota power plant was not running at full capacity, which caused a water imbalance. This condition led to evaporation pond levels rising to near-overflow conditions. Plant personnel were concerned they could be put in a situation where any overflow would have violated EPA regulations, which could have led […]
Read More
View Full Case Study Problem When a production plant for a large automotive manufacturer in Michigan suddenly lost its ability to produce ultra-pure water, MPW quickly provided the solution. One of two pumps in the plant’s permanent Reverse Osmosis (RO) system failed. Without ultrapure water, the plant could not properly prepare its auto chassis for […]
Read More
View Full Article Keeping up with the Times by Jimmy Peck Americans were moving to the suburbs, Ray Kroc launched the McDonald’s restaurant chain and Elvis Presley was an international sensation when continuous casting was introduced in the manufacture of steel. Since the process revolutionized the steel industry in the 1950s, engineers have continually perfected […]
Read More
View Full Case Study Problem When a power generating plant in Ontario, Canada required the most efficient steam blow services, it called MPW. The steam blow required high-purity water processed from the plant’s city water source. Trailer economy would be key in formulating the best plan. Additionally, distance from the prospective suppliers and the potential […]
Read More
View Full Case Study Problem A pulp mill in Eastern Canada faced quality issues due to inadequate filtration capacity in its gravity/sand filters. In the spring, snowmelt run-off causes the inlet water quality to drastically decline at the plant’s system intake. Given the increased contaminant loading, the facility could not meet the water-flow demand through […]
Read More
View Full Case Study Problem For years, springtime had presented a distinct challenge for a large chemical-production complex in Alberta, Canada. With rain and melting snow, the facility could not handle the resulting high turbidity and TOC (Total Organic Carbon) in its feed water. Because of the elevated TOC levels, the facility was forced to […]
Read More
View Full Case Study Problem At a start-up commissioning situation at a power plant in Wyoming, the water balance was out of sync with the assets available to handle it. Therefore, the water level was threatening to breach the pond at this zero liquid discharge site. The water that was to be used when in […]
Read More